Incorrect low-air-loss mattress settings and failure to follow pressure injury care orders
Summary
The facility failed to provide appropriate pressure ulcer care and to prevent new ulcers from developing by not following its support surface policy, not following physician orders, and not maintaining correct settings on low-air-loss mattresses for four residents. The report states that support surfaces were to be used in accordance with evidence-based practice and physician orders, and that the air mattress should be set at the resident’s weight or per manufacturer instructions. Survey observations and interviews showed that the mattresses for R3, R43, R80, and R41 were set incorrectly, including settings far above the residents’ actual weights and, for one resident, an incorrect static mode. R3 had a stage 3 pressure ulcer to the right elbow, severe cognitive impairment, dependence on staff for bed mobility, and a care plan calling for a pressure relieving/reducing mattress while in bed. Although the order required the low-air-loss mattress to be checked every shift and set at the patient’s weight or per manufacturer instructions, R3 was observed on 2/24/26 with the mattress set to 320 lbs and in static mode. The wound care tech stated R3 weighed about 132 lbs and that the bed was not supposed to be on static mode. The wound nurse later stated R3’s bed should not be on static and should be on dynamic mode. R43 had severe mental status impairment, required partial/moderate assistance with rolling, and had a care plan identifying risk for altered skin integrity related to bed mobility, fragile skin, and incontinence. The resident’s order required the low-air-loss mattress to be set to the resident’s weight or manufacturer instructions for prevention. On observation, R43’s mattress was set near 400 lbs and on firm, while the resident’s weight was documented as 185.6 lbs. The wound care tech adjusted the setting after stating it should be on 185 lbs. R80, who was non-verbal and had multiple serious diagnoses including hemiplegia, aphasia, dysphagia, and contracture, was also observed on a low-air-loss mattress set at 400 lbs despite weights documented around 181 to 186 lbs. R41, who was cognitively intact but dependent for self-care and mobility, incontinent, and had MASD and partial-thickness dermatitis to the left posterior thigh, was observed complaining that the bed was very hard and uncomfortable; the mattress was set between 360 and 400 lbs even though the resident’s weight was documented around 239 to 240 lbs. Staff interviews confirmed that the mattress setting was too high and that the setting should be based on the resident’s weight.
Penalty
Resources
Below are regulatory guidelines relevant to this citation:
Trusted data from CMS and state health departments
Every citation, penalty and Plan of Correction is sourced from public CMS records (latest release July 29, 2026) and official state health department websites — never guesswork.
In your survey window? See what surveyors are citing.
The Survey-Prep Report maps your facility's risk from 12 months of CMS and state citation data — what's being cited around you and what to check first. $129 one-time.