Unsafe Water Temperatures, Unsecured Oxygen, and Inadequate Shower Chair Safety
Summary
The deficiency involves the facility’s failure to maintain safe water temperatures and functional safety equipment in resident bathrooms and a shower room, as well as failure to secure oxygen equipment and ensure safe, appropriate use and maintenance of shower chairs. During an environmental tour, surveyors measured excessively hot water at multiple resident hand sinks and in a shower room, with temperatures ranging from 120.7°F to 130.3°F at hand sinks and 127.1°F at a shower. Residents reported that the water became very hot and that they had to check the temperature before using it. In the [NAME] Shower Room, the cold-water knob/handle was missing from the bathroom hand sink, and the call light switch on the shower wall was not functioning, as confirmed by the Director of Maintenance (DOM) K. In the boiler room, the temperature valve on the large holding tank read 134°F and the mixing valve read 130°F, which did not match the 120°F temperature DOM K stated he had previously recorded as the outgoing water temperature. The deficiency also includes failure to secure oxygen equipment. During an observation in one resident’s room, an unsecured oxygen tank was found standing alone at the foot of the bed under the window. The Regional Nurse Consultant acknowledged that the oxygen tank should have been secured. This unsecured tank represented an accident hazard in the resident’s immediate environment and reflected a lack of appropriate supervision and environmental safety controls. Another component of the deficiency concerns the facility’s failure to ensure that shower equipment was appropriate for a resident’s weight and maintained in safe condition. Resident R2, a cognitively intact individual with reduced mobility, generalized muscle weakness, morbid obesity, and dependence on staff for bathing and transfers, weighed over 400 pounds at the time of the incident. While being lowered into a bariatric shower chair in the shower room using a mechanical lift, the chair’s leg broke and the chair collapsed, causing the resident to fall to the floor and hit his head. The resident described the chair as made of flimsy, thin PVC piping, appearing small for his size, and reported that it splintered into many pieces. DOM K stated he did not perform preventive maintenance checks on shower chairs, did not know the brand or weight rating of the broken chair, and that the maximum weight limits were not printed on the chairs. Staff interviews revealed confusion and lack of clear knowledge about the weight limits of shower chairs, with some staff believing chairs were color coded by weight capacity but being unable to identify actual limits or find manufacturer information on the chairs themselves. These combined findings show that the facility did not prevent accidents or maintain an environment free from accident hazards in multiple areas: excessively hot water in resident rooms and a shower room, missing sink hardware and a non-functioning shower call light, an unsecured oxygen tank in a resident room, and the use of a shower chair of unknown and unverified weight capacity that collapsed under a bariatric resident during a transfer.
Penalty
Resources
Below are regulatory guidelines relevant to this citation:
Trusted data from CMS and state health departments
Every citation, penalty and Plan of Correction is sourced from public CMS records (latest release July 29, 2026) and official state health department websites — never guesswork.
In your survey window? See what surveyors are citing.
The Survey-Prep Report maps your facility's risk from 12 months of CMS and state citation data — what's being cited around you and what to check first. $129 one-time.