Food Safety and Equipment Compliance Issues
Summary
The facility failed to ensure proper food storage in accordance with professional standards of food service safety. During an observation, a box of raw ground hamburger was found stored above pork cutlets in the walk-in refrigerator, contrary to the facility's policy and procedure which indicated that whole cuts of meat should be stored above ground meat. The Food Service Director (FSD) confirmed the improper storage and acknowledged the posted guidelines for proper food storage order were not followed. Additionally, cooked pasta, a Time-Temperature Control for Safety (TCS) food, was found in the walk-in refrigerator without documentation of the cool down process on the cool down log, as required by the facility's policy. The FSD and Kitchen Supervisor verified the omission and confirmed the pasta was intended for resident meals in both assisted living and skilled nursing sections of the facility. The facility's policy required recording food temperature every hour during the cooling process, which was not adhered to in this instance. The facility also failed to maintain an appropriate air gap between the dish machine drain and the floor sink drain to prevent contaminated water from backing up into the dish machine. Observations revealed that the black plastic pipe used for drainage extended below the flood level rim of the floor sink drain, and the copper pipe was zip-tied to the black plastic pipe but not utilized for drainage. The Director of Maintenance (DOM) and FSD confirmed the lack of an appropriate air gap, which did not meet FDA food code guidelines requiring a one-inch air gap above the floor sink drain rim. An email communication with the Department of Health Care Access and Information (HCAI) also confirmed the requirement for an air gap and the prohibition of plastic pipes for drainage. Furthermore, the facility did not follow the high temperature dish machine (HTDM) manufacturer guidelines. The HTDM was observed to have wash and rinse temperatures below the required levels, with the wash temperature reaching only 138 degrees Fahrenheit and the rinse temperature reaching 158 degrees Fahrenheit, whereas the manufacturer's guidelines required a minimum wash temperature of 155 degrees Fahrenheit and a rinse temperature of 180 degrees Fahrenheit. The facility's policy mandated recording dish machine temperatures every shift and reporting any deviations to the Director of Food and Nutrition Services, but the Dishmachine Temp Log indicated multiple instances of temperatures below the required levels without appropriate action being taken. The FSD and Kitchen Manager confirmed the non-compliance with the manufacturer's guidelines and the facility's policy.
Penalty
Resources
Below are regulatory guidelines relevant to this citation:
Trusted data from CMS and state health departments
Every citation, penalty and Plan of Correction is sourced from public CMS records (latest release August 26, 2026) and official state health department websites — never guesswork.
In your survey window? See what surveyors are citing.
The Survey-Prep Report maps your facility's risk from 12 months of CMS and state citation data — what's being cited around you and what to check first. $129 one-time.